Are you interested in or thinking about starting a Pressure Washing Business? Have you recently started your Pressure Washing Company but would like to learn the Difference Makers that can move your business to the next level? If so, then the Pressure Washing Difference Makers school is perfect for you. My passion is helping new business start ups with training to help you become successful and drastically cut your learning curve.
Class Room and Hands On Training
House Washing, Roof Cleaning, Concrete Cleaning, Property Protection
Soft Washing vs Pressure Washing: when and where to use which
Soft Washing with a Pressure Washer
Hot Water Pressure Washing: when and where to use it
Sales Techniques and Training
Creating Residential and Commercial Proposals
Identifying Surfaces, Stains and Application Methods to Clean Them
Setting Customer Expectations
Chemical Mixes and Ratios
Hands on Training in The Parking Lot of the Hotel
How to Set Up On the Job Site for Maximum Productivity
Cleaning and Work Site Procedures that Save You TIME
Limited Seating Available
We will hold this school at the Country Inn & Suites located at 20611 US-59, Humble, Texas. Both days we start at 9:00am and end about 4:00pm. We have a special room rate of $70 a night. Just mention that you are attending the Doug Rucker School. You can call the hotel directly at 281-446-4977.
If you are flying in, I suggest flying into the Houston George Bush Intercontinental Airport (IAH). The hotel has a free shuttle that can pick you up and take you back when the school is over.
Seating is very limited so please make sure you register quickly, and make sure you can attend. NO REFUNDS WILL BE GIVEN. If you need to cancel or your plans change, you will be able to attend another Pressure Washing Difference Makers class at a future date. If you have any questions, please text me at 281-883-3630 or contact me using the contact form HERE.
All of our trucks and trailers now have a ball valve installation that we recommend. It is a three way valve that allows us to make a switch. We can switch from the tank fill to a garden hose quickly and easily. Some of examples for using thisinclude filling a bucket, or the need for a high wash station. If we need light pressure for anything like rinsing off the truck or anything else, it’s much easier than using a drain hose.
HOW BALL VALVE INSTALLATION WORKS
Water arrives to our rigs through the garden hose reel. It then flows directly into the ball valve. It can easily switch from filling the tank to a rig mounted garden hose. With several different nozzles, you are able to use it in different ways. For example, we have a fireman’s nozzle that can be purchased from Home Depot or Lowe’s. This nozzle provides a wide range or garden hose pressure from a pretty long, straight stream to nothing more than a trickle if needed. It’s ideal for filling a soap bucket without creating a lot of splashing suds. In addition, we have a second nozzle that provides stronger pressure and a longer stream. It’s the same nozzle that we use for just rinsing houses using a dedicated pump.
In this video, we also provide a quick view of the entire trailer. I have been testing a booster pump, but eventually concluded it’s not really worth using. I was not impressed at all! So if you have any questions about this ball valve installation, just shoot me an email and I’ll answer as quickly as I’m able. Be sure and subscribe to our YOUTUBE CHANNEL for more helpful videos. Perhaps you would enjoy another post about a newer pressure washing truck rig.
Paying close attention to PRESSURE WASHING BUSINESS SYSTEMS is vital for new start up companies. We understand that some believe simply buying a pressure washing machine is enough to start a business. But nothing could be farther from the truth! To be successful, PRESSURE WASHING BUSINESS SYSTEMS must be given adequate consideration before you begin investing in equipment. Specifically, there are three PRESSURE WASHING BUSINESS SYSTEMS to vet fully and carefully in order to succeed.
IN THE OFFICE
You will need to consider who will answer the phone, and how will they convert inquiries into business. Another factor is the process of estimating. Each potential customer will need to provide specific details regarding the scope of work needed. And of course, this will need to be recorded carefully and completely. Is there a gate code? Are there any pets? Will the customer be home or away while work is completed? And how will you write the estimate? Will you be using google maps street view and other online tools? Or do you plan to see the property before writing up an estimate? Will it be a paper or digital estimate? You will also want to keep a customer database. In addition, a marketing strategy is a major component of PRESSURE WASHING BUSINESS SYSTEMS in the office. And did we say accounting? How will you receive payment?
ON THE JOB
You will need a clear statement of policies and procedures guiding actual work on the job. From the moment you arrive until you leave after completing the work, what are the critical, common steps to take. How is the property prepared for work to protect from damage? A plan must be in place for things such as light fixtures, furnishings, plants, and windows. Not to mention electrical outlets and boxes, a/c unit and even possible existing damage to the structure itself are important considerations. PRESSURE WASHING BUSINESS SYSTEMS on the job is an immense help when it comes to completing the work efficiently, professionally, and profitably. Time for these systems must be factored into every estimate.
Once the job is the complete, how will you follow up? Will you send each customer a thank you card? Do you plan to utilize a survey to improve customer service? Will a return visit be scheduled? Do you provide a satisfaction guarantee? If so, this means some customers may require a return visit to touch up any missed areas. If the customer is disappointed with service, you’ll want to make it right. This will help ensure future business with them and increase the chance of a positive referral. Speaking of referrals, will a referral strategy be part of your PRESSURE WASHING BUSINESS SYSTEMS follow up? A customer database will allow you to reach out to them again in the future. Recording vital contact information such as name, address, phone numbers and emails is imperative for a successful PRESSURE WASHING BUSINESS SYSTEMS follow up strategy.
We are fully convinced that all of the equipment you invest in will sit idle without PRESSURE WASHING BUSINESS SYSTEMS. These systems need to be in place for the office, on the job, and follow up before you complete your first project. If not, you will find yourself scratching your head and wondering what to do next!
Through out the year we have several Pressure Washing Training Events that you can attend. If you live outside the Houston area, you can also become a member of our Online Video School. For more information on the training we offer feel free to email me at firstname.lastname@example.org. Be sure to visit our You Tube Channel and subscribe.
We are adding a different kind of school to our schedule this year. For the past 6 years I have been offering a 2 day monthly Pressure Washing Training Houston Texas school. This October I and we will be hosting a 2 day school October 19-20, 2019.
The last few years I have noticed that many start up companies are not comfortable with proper cleaning techniques and how to price jobs. There are far to many that think soft washing can only be done with a 12V pump. Because most assume a pressure washer can only be used for cleaning concrete or porous surfaces. Knowing how to sell your services and how to create value gives way to bidding a low price just to get the job. Once this happens your company is not profitable and therefore not sustainable for the long term.
Power Wash Training That Makes A Difference
Not only are we going to teach you proper cleaning techniques, we are also going to spend time on the Business End of your company. Pricing commercial and residential jobs, creating value in your services at fair prices for you and your customer. Managing Customers, Property Protection, Chemical Mixes and Ratios, How to save time on the Job Site, Soft Washing vs. Pressure Washing and how to identify surfaces, stains and application methods are just a few of the classes we will be teaching on.
This school is being held at the Country Inn & Suites located at 20611 US-59 Humble Texas. We have a special room rate of 70$ a night. Just mention that you are attending the Doug Rucker School. You can call the Hotel directly at 2814464977. If you are flying in, I suggest flying into the Houston George Bush Intercontinental Airport, (IAH). The hotel has a free shuttle that can pick you up and take you back when the school is over.
It is my desire that this Pressure Washing Training Houston Texas school will be a Difference Maker and help take your business to the next level. The cost of this two day training school is $359.00 and you can register by CLICKING HERE.
Hey, everybody! Real quick. I’ve see some post with people having problems
with their bleach tank getting degraded for various reasons. Pressure Washing Strainers degrading bleach can be the biggest cause for this.
A lot of the time it’s caused by these metal strainers. Your bleach will degrade these pretty quickly.
It can cause your bleach mix to turn orange or black. All these metal shavings will get left down
at the bottom of the tank. Every time you put bleach in it, it’s going to continue to degrade it. We
use our bleach fast enough that it doesn’t have time to degrade.
Get rid of these! Don’t use them on anything that’s going to come in connect with bleach. We
don’t even use them with water. They come with the X-jet. Use the pail system on the X-jet and
get rid of this. You won’t have that problem.
PVC Pipes are great Strainers
If you’re downstreaming or using a dedicated pump, there are a couple of different ways you
can do it. These are two different types of PVC pipe. You have the female threads on the inside.
You can screw you pipe onto those. These are plastic, it won’t degrade it. I don’t like these
because I feel like these can starve your pump. I don’t think you get the flow you should. People
disagree with that and that’s ok. It’s what I feel so I don’t use these. I’ve had these sitting around
for years. If I ever did use them, I’d cut them off here.
Mainly, what we use, depending on if it’s a dedicated pump or if it’s downstreaming, we’ll use
something like this. It’s cut of and angled. We’ll actually run our dip hose or our braided hose
down through there. We’ll fasten these black strainers on if we’re downstreaming. That’s what
we use. There is a little weight in there.
I’ve never had a problem with these degrading our mix or the black causing it to turn a color.
They’re pretty safe. What you will have is the bleach will eat this cap our. The weight or
magnet will fall out. That’s why we have the pipe on there to keep it weighted down in the
bucket or the tank. We use those.
On our dedicated pumps, we don’t use a strainer. We actually use a PVC pipe and a 90. That
way we’re getting full flow.
Keep Your Pressure Washing Tanks Clean
One of the things we do is we keep our tanks clean. We have a bulk head that runs at the
bottom of the tank. We’ve been doing this for three or four years. It doesn’t hurt anything. The
bleach doesn’t hurt the bulk head fitting. At least, we’ve never had that problem. We run a hose
off of that bulk head fitting.
We use that for filling up X-jet buckets if we ever need to use and X-jet. Mainly we use it for
filling up pump up sprayers when we need to use pump up sprayers. We also use it to keep the
tank flushed out. It’ll get empty and about every 2 weeks we’ll take a water hose in there. We
don’t get a lot of grit in there. We keep it clean.
The other thing that could cause your problem is the type of soap you’re using. Sometimes
different types of soap can cause your bleach to degrade. It can cause it to turn colors. You
might switch your soap and see if that’s the issue.
Metal Causes Rust Issues
When you got a tank and bleach that’s degrading/changing colors, you’ve got to find out what is
different in that tank. What’s in my water tank(if your water tank is not doing it). Bleach will
I hope that helps you guys. That’s various different ways to get rid of these. You can use these if
you feel safe. We don’t sell them. I don’t recommend them. You can get them at many of the
other vendors around that sell those. This is what we use for downstreaming. Then just regular
PVC, we cut and angle or we put a 90 on it. We get our full flow. The key is keeping your tanks
clean for whenever you have a problem, isolating and figuring out what’s caused it. Using the correct Pressure Washing Strainers will help to solve this.
I hope that helps you guys!
If your just starting out in the pressure washing and roof cleaning business be sure to check out our online video school.
Starting a Pressure Washing Business can be an extremely daunting
task. To begin with, you have to address so many details before you even start
cleaning. First you have to navigate legal matters and accounting, and then you
need to determine internal policies and procedures. And that is a challenge!
I must admit, establishing a set of Pressure Washing SOPs takes time and
effort and demands knowledge and consideration of a wide variety of topics.
But fortunately, I have found an incredible resource that can help save you
time and money. Pressure Washing SOP’s out of Florida is making a
ready-to-use Pressure Washing Standard Operating Procedures
available to our students and anyone else who is starting an exterior
cleaning business or already owns one. In order to simplify the process, I
have them available to purchase right here through our web site.
So what do you get? In short, you get an all-inclusive set of policies and
procedures for your business. Check out the attachments of screenshots
below for the complete list of policies separated by category. Certainly,
these will get you squared away with almost everything you will need to
implement a set of SOPs in your business. And this can be customized
with your logo, company name, and watermarked image. What’s more,
you can edit any of these files as you see fit, as your company grows, or
you can create your own policies using the templates.
Save Time and Money with Pressure Washing SOP’s
So why do you need these documents with policies and procedures
1) To begin with, it gives your employees clear expectations. If you don’t
give clear-cut and precisely defined expectations, you have nothing
to which you can hold them accountable.
2) Also, it provides for disciplinary action and related documentation.
You will have clearly defined stages with explanations and forms for
documentation promoting performance improvement. In addition, it
will also help protect you from paying unemployment or being stuck
with a problem employee.
3) Additionally, it includes protective policies for issues such as sexual
harassment, equal opportunity, and workplace violence.
4) Plus, you get forms such as applications for employment, interview,
damage to property, lost or damaged equipment, incident reporting, and
much more….The list goes on and on…
Order NOW and Save Money
Placing an order is pretty simple:
1) First of all, click the link below to order your own set of Pressure Washing
Standard Operating Procedures.
2) Then, Pressure Washing SOP’s will send you a Non-Disclosure
Agreement. You will need to review this, sign it, and send it back.
3) Once you have done that, you will need to send a high quality
version of your logo (Vector format often works best, or PDF, or PNG).
The Doug Rucker School is pleased to announce that our 2019 schedule is available. This schedule is for those interested in attending Hands On and Class Room Training. It is held here in Houston TX, as we enter our 9th year!When you attend this school, you will be able to see and use the equipment that we use daily for our Houston Pressure Washing Business. We also have class room teaching that covers a wide variety of subjects such as, Roof Cleaning, and House Washing. We also teach Concrete Cleaning, Plant and Property Protection, How to Bid Jobs, Customer Care, Chemical Ratios and Mixes. Identifying Surfaces, Proper Application Methods and much more will be addressed. Listed below is the Pressure Washing School Schedule 2019 dates.
January 14,15, February 11,12, March 11,12, April 8,9, May 6,7, June 10,11, July 8,9, August 12,13,
September 9,10, October 14,15, November 11,12, December 9,10
When attending the school here in Houston, I recommend you fly in to the George Bush Intercontinental Airport. It is best to arrive on Sunday afternoon or early evening. This airport is the closest to our training facility. The hotel I recommend you staying at is the Courtyard Marriott Kingwood, located at 130 Northpark Plaza Dr Kingwood, Tx 77339, 2819731790. When making your reservations, be sure to let them know you are attending the Doug Rucker School so you get the School Discount on your room.
The hands on training portion is usually held on the first day, Monday, and starts at 9:00am. The classroom portion is on Tuesday. We are usually finished each day by 1pm or so. This allows you time to visit the Houston area and any of our many attractions. Once you have registered and paid, we will contact you with the location of the training or arrange for pick up at the Courtyard Marriott. Registration for any of our training classes can be made by clicking HERE.
If you have any further questions, please feel free to call or text me at 281-883-3630 or by email at email@example.com. Look forward to seeing you in Houston and helping you start and build your business. Also stop by our you tube channel HERE for some helpful hints and tips.
Once you have attended my school here in Houston, you will always have access to me via Phone Call, Text Message, or Email at no additional charge. I am here to help you become successful, long after the school ends, and just because the School ends does not mean the education does.
Join us on July 19 & 20, in Houston Texas for the F9 Concrete Restoration Training Event being held at the Courtyard Marriott Kingwood Texas. And the Courtyard Marriott is located at 130 Northpark Plaza Dr Kingwood Texas. They will have rooms for $119.00 through July 1st.
Classes start both days at 9:00am. So in order to attend this FREE training event you must register at UAMCC EVENTS PAGE
Battery Acid Stain removal
Craig Harrison; inventor of F9 products and the F9 TEAM, Jerry McMillen of Sirocco Water Recovery Systems, and Ron Musgraves. This Class is a comprehensive, HANDS-ON Maintenance Cleaning, Acid Washing, Neutralization, Vertical & Flatwork Rust Removal, Oxidation Removal, and Concrete Restoration*FULL 2 day course which includes Water Recovery Methods.
Focus of Training
Hard surface maintenance cleaning*(keeping those surfaces cleaner longer with F9 Groundskeeper), hard water stain removal, low speed floor tool applications, vertical and flatwork rust removal, prepping concrete for a concrete coating or stain/seal, covering up surface cleaner marks, blending in damage from wand/turbo tip or deep surface cleaner etching and more! You will learn the Front 9 Restoration unique approach to restoration and maintenance.
F9 creator, Craig Harrison, developed it over many years and millions of square feet of cleaning. In addition, this process is something that can be applied to concrete, bricks, pavers, tile, stone and many other hard surfaces. You will achieve mind blowing results that will surely separate your company from your competition! In addition, you will learn how to sell battery rust removal stain jobs, rust removal jobs, hard water stain removal jobs, commercial sales and more. Learn how to completely separate yourself from your competitors, increase profits and make your customers say “yes!!” Because these techniques are unique to Front 9 Restoration, you will not learn these secrets anywhere else in the world.
Rust Stain Removal
So learn how to always clean your surfaces more effectively and more efficiently than your competition. And provide a surface that stays cleaner longer! Copies of the one hour F9 powerpoint presentation that will be given in the morning, sales techniques, training info, networking ideas and more is available for purchase for $25.00 Cash Only. And the best part is all hands on hours count toward UAMCC credit hours!
What to Bring: Notebook and Pen for taking a lot of notes
Work Attire: Boots, Gloves, Glasses and Respirator. Most importantly bring a great attitude!
Kingwood Texas is the site of my annual FREE Houston Pressure Washing Training Event. So join us February 18th and 19th at the Courtyard Marriott, Kingwood Texas. Thus, this event is FREE to all contractors to attend and will have classes and equipment demonstrations designed to help you take your business to the next level. We will have educational classes that will benefit your business model, whether commercial or residential focus.
So please go to UAMCC EVENTS to get registered for this two day FREE event.
EVENT SPEAKER SCHEDULE
Houston Pressure Washing Training Event
Our keynote speaker once again will be Mitch Beckman leading it off the first day with another great inspiring and challenging talk about the “YouTudes”. Thus, you don’t want to miss this.
Our second day will start off with Jeffrey Blackman “Trusting and believing in Dark Times”, if you missed Jeffrey at the UAMCC National Convention, here is your opportunity to hear his inspiring story of going from living under a bridge in New Orleans, to now operating his very successful Houston Tx Pressure Washing and Striping company.
Other speakers and trainers will be Craig Harrison, of F9 Restoration Products, Jerry McMillen, with Sirroco Vacuums and owner of www. pressurewasher.net, Jerry is one of the foremost and sough out leaders on Environmental Compliance for Pressure Washing and other exterior cleaning/interior cleaning companies. Gerald Vess, owner of Roman Roof Cleaning, Ron Musgraves on Commercial Sales, and more. Here is the full agenda:
9:00 AM Mitch Beckman- “You Tudes”
10:15 AM Craig Harrison– Building theF9 Team
11:15 AM Paul Ballard– Unger Water Fed Pole Cleaning
12:15 PM Lunch
1:30 PM Gerald Vess – Roof Cleaning Process
2:30 PM Circuit Training – / Soft Wash / Window Cleaning / Sidewalk/ Restoration Event
4:30 PM Circuit Training – / Soft Wash / Window Cleaning / Sidewalk/ Restoration Event
9:00 AM Jeffery Blackmon- Never give Up
9:45 AM Doug Rucker– “Don’t Compete on Price”
11:00 AM Jerry McMillen – Wash Water Control Certification Environmental
12:15 PM Lunch
1:30 PM Doug Mineart – Hard Surface Sealing
2:30 PM Expert Panel – Ask Anything
3:00 PM Ron Musgraves & Kristy White– Commercial Sales Residual Income
AS OF 01/31/18 THIS IS SOLD OUT. YOU CAN TEXT ME AT 2818833630 AND ASK TO BE PUT ON THE WAITING LIST.
On February 21st, 2017, in Kingwood, Texas, I will be hosting a full-day Pressure Washing Soft Washing Training Camp. This is for those new to the exterior cleaning industry. We instruct on proper cleaning techniques for cleaning a variety of different surfaces. Join myself and Ron Musgraves for hands-on training. We teach how to clean the exterior of a hotel, the entry area of a hotel, and the hotel pool deck. We will also teach you proper cleaning methods for sidewalk cleaning, dumpster pad cleaning, and even gas station cleaning. Also included is an afternoon classroom session covering Commercial Sales.
Early registration price for this training is $129, and you must register before January 15th to avoid the price increase. For registration go to our EVENTS page.
Location of the class is the Courtyard by Marriott in Kingwood, Texas, located at 130 Northpark Plaza Dr., Kingwood, TX, 77339. For registration and payment, please go to the EVENTS page on the web site.
Pressure Washing Soft Washing Training Camp
For room reservations at the Courtyard Marriott, call 281-973-1790 and be sure to mention you are attending the Doug Rucker School to receive the discounted room rate they are offering to attendees.
If you are flying in, the closest airport is the George Bush Intercontinental Airport (IAH).
Don’t forget to register for my Annual FREE networking and training event being held February 22nd and 23rd at the Courtyard by Marriott in Kingwood, Texas. For registration for that event, please go to UAMCC EVENTS