by Doug Rucker Doug Rucker

COMMERCIAL PRESSURE WASHING SETUP

COMMERCIAL PRESSURE WASHING SETUP

One thing that every job must have is some sort of water source.  Either it’s on the property, or you’re hauling the water.  Recently we overcame a few challenges getting water on large commercial property.  So this commercial pressure washing setup post and video will help other pressure washing professionals do the same.

THREE IMPORTANT  CONSIDERATIONS

First, what are your water source locations?  Second, how much water pressure flow volume are able to get from each location?  Third, what is the distance from the water sources to the cleaning areas?  The answers to these questions help determine how you set up for commercial jobs.  This will help determine the ideal setup location based on how many times will you need to move setup in order to keep cleaning.  As you examine water sources, check for leaks and let the owner know about those issues.

commercial pressure washing setup

 

 

 

 

 

TOOLS NEEDED

One important tool to possess for commercial pressure washing setup is a water key.  A four way sillcock key is another term for this tool that opens enclosed water sources on many commercial properties.  But these are usually available at home improvement stores or hardware stores in plumbing.  You really need to watch the entire video to gain more practical information for commercial pressure washing setup.  The video provides an aerial schematic of the various water flow options along with back flow.  These can be difficult to locate on commercial properties.  If you are new to the pressure washing industry in need of a website, consider this!

For more tips and tricks on commercial pressure washing, check out this video.

by Doug Rucker Doug Rucker

COBWEB REMOVAL TIPS

COBWEB REMOVAL TIPS

A repeat customer needs the front of her home cleaned before hanging Christmas decorations.  In this case, our COBWEB REMOVAL TIPS might come in handy for your pressure washing business.  The first tip is to clean any light fixtures.  This means removing the glass panels.  It’s important to clean these glass panels over the grass rather than over a concrete surface.  This reduces the chance of breaking the glass if one of them is accidently dropped.  This not a usual or normal part of the job, but our commitment and attention to detail sets us apart from the competition. We used a soft towel wiping down the inside of the fixture.  This type of superior customer service will help you retain customers and generate continuous repeat business.

COBWEB DUSTER

One of the main tools we use is a cobweb duster.  You can purchase these at home improvement stores or DIY pest control stores.  This approach means we reduce the amount of water needed for cleaning the surface after removing the cobwebs.  You always want to use the least amount of water possible when cleaning the entry way to avoid water intrusion into the home.  By using a towel and hand detailing certain areas and spaces, the visual result will be much better.  And you reduce the risk of causing damage because you can’t always little cracks and cervices where water can penetrate and create havoc.

SHOOTER TIP

We use the SLING SHOT SHOOTER TIP from the Doug Rucker Store.  At $22, this newly custom manufactured tip for us comes in three gallon per minute options.  This is for down streaming with your pressure washer.  In the picture below, you can see how this tip reaches higher then the third floor dormer window.  I spent several years testing this tip and finally got it perfected after several modifications.  It has a hex end which tightens easily into a quarter inch coupler plus.  Another one of our COBWEB REMOVAL TIPS is using RAP, which is an all purpose cleaner and surfactant at a 24-1 mix ratio.  So no bleach was needed for this project.  Consider coming to Houston for one of my two day training events this year.  It’s a great opportunity for continuing education and meeting new friends in the business.

 

Cobeweb Removal Tips

by Doug Rucker Doug Rucker

PRESSURE WASH TRUCK

PRESSURE WASH TRUCK

At Doug Rucker Store, we provide PRESSURE WASH TRUCK and trailer build service.  This is especially helpful for those just starting out in the pressure washing business.  We recently had an opportunity to provide this service for a  pressure washing pro from Austin, Texas.  They purchased a previously city owned vehicle and brought it to us for the build out.  We did make some minor repairs and improvements to the enclosed portion of the truck before installing equipment. This included things like patching holes, installing new aluminum flooring, and sealing all surfaces. This phase is important to ensure maximum protection of new equipment.

 

 

SOFT WASH WITH KINGSLINGER

First, the KINGSLINGER SOFT WASH SYSTEM goes in with plumbing through the floor.  This is because the unit needs to be drained to keep moisture from building up and adversely affecting the system.  When considering a pressure wash truck or trailer build, this is a great way to provide soft wash service.  Soft washing is critical to protect a variety of surfaces from damage resulting from large volume of high pressure water blasting.  It has three different valves to meter mix ratios, usually water, bleach and another detergent.

 

ADDITONAL PRESSURE WASH EQUIPMENT

This particular project was for an existing car detail business that was expanding their service into the pressure washing sector.  So for this pressure wash truck build, we provide him with a new pressure washer also plumbed to an 85 gallon space saving tank.  In fact, two new tanks enable him to store water and bleach.  They are bolted down and firmly secure.  The schertz box remote control for down streaming and a new surface cleaner is also part of this package.  In addition, hoses and hose reels are a great addition to this pressure wash truck build.  It’s important to have pressure hose, soft wash hose, and a garden hose.  For larger projects, you would also want to consider spare hose in order to effectively clean without having to relocate equipment.  If it interests you, check out another post.  The sled is what makes this one really special!

pressure wash truck

by Doug Rucker Doug Rucker

KINGSLINGER DISTANCE

KINGSLINGER DISTANCE

Many potential customers inquire about Kingslinger Distance through the Doug Rucker Store.  The Kingslinger Soft Wash System can be connected to a 5 GPM or 10 GPM pressure washer.  There are options with the Kingslinger such as with or without the compressor.  Also, hose or hose reel options can be considered.  One of the variables to evaluate when considering  any soft wash system is distance.  We provide a video demonstration of with a measuring wheel.  This allows you to see what you’re actually getting in terms of distance.  Here is more information when considering pressure washing start up business equipment.

KINGSLINGER DISTANCE VIDEO DEMO

KINGSLINGER DISTANCE 45 Feet

Upon measuring in no wind conditions, we were able to get to approximately 45 feet.  This was while using an 0020 nozzle, and then an 0040 nozzle.  Adjusting the ball valve vertically will obviously affect KINGSLINGER DISTANCE.   This is extremely handy especially for roof cleaning projects.  Some distance will be lost from the ground when cleaning straight up on vertical walls.  Our estimate would be around 2 feet.  Wind will also be a factor for distance with Kingslinger, or for any soft wash system in use.  We also discuss in detail the importance of evaluating the actual dedicated pump for any product you are considering.

KINGSLINGER GF VALVES

Another option available is GF valves, which we have found to help improve flow.  You can choose between the GF or Pentair valve system.  The three valve system allows you to control the mix for water, bleach, and any other cleaning solution you might be using.  Regardless of the mix ratio or detergents used, you can still count on approximately 45 feet for KINGSLINGER DISTANCE.  There are several more Kingslinger product videos available on the product website at the bottom that might interest you as well.

 

Kingslinger Distance

Rear View

 

 

by Doug Rucker Doug Rucker

SURFACE CLEANER VIDEO

SURFACE CLEANER VIDEO

If you need SURFACE CLEANER VIDEO TIPS, you’ve come to the right place!  I use  a Hurricane 4 Gallon Per Minute Pressure Washer, which is a great starter unit.  There are many surface cleaners to choose from, but the one I use is the Whisper Wash Ultra.  This is a sixteen inch deck.  There are many considerations to work through such as size, nozzles, and personal preferences.

FORMULA FOR SIZE CHOICE

Here is the standard industry procedure for calculating surface cleaner size with the pressure washer machine.  For every 4 gallons per minute on your machine, you need 4 inches of surface cleaner size.  So my 4 Gallon Per Minute machine multiplied by four equals a 16 inch surface cleaner.  5 Gallons Per Minute would mean use a 20 inch surface cleaner and so forth.  Of these surface cleaner tips, this is most important remember as you evaluate which model to purchase.  If you’re surface cleaner is elevating off the surface, you are using way too much pressure.  While some suggest weighing it down with a brick or something similar, I take a different approach.  Using too much pressure with a surface cleaner can cause damage to the concrete.

SURFACE CLEANER NOZZLE OPTIONS

Most surface cleaners come with some nozzles included.  2502 is the most common nozzle size.  The 25 indicates the spray pattern and the 02 reflects gallons per minute.  I go over some other important mathematical considerations relating to surface cleaner nozzles.  Be sure and watch the entire video for all the details.  But here is the approach I take when the surface cleaner pressure washer is too high. Basically, I switch out the nozzles and find the one that works most appropriately.  The 2503 was the ideal nozzle for this particular combination.  It’s good to get the nozzle that is the perfect fit for your pressure washer.  But it’s also good to have a couple nozzle options that are right above and right below that threshold.  The surface you are cleaning will also factor into this decision.  Here are some other great helpful videos for professional pressure washing equipment maintenance. I also provide monthly training events here in Houston, Texas.  And if you have a pressure washer that won’t start, check this out.

surface cleaner tips

by Doug Rucker Doug Rucker

BEST PRESSURE WASHING TRAILER BUILD

BEST PRESSURE WASHING TRAILER BUILD

Recently in Houston, we had the opportunity to provide the BEST PRESSURE WASHING TRAILER BUILD for a local company.  This local roofing company was desiring to add to their services roof installation and repair.  Thus, with this BEST PRESSURE WASHING TRAILER BUILD addition, they are now able to offer roof cleaning and complete pressure washing to the services they offer.  So this will empower them to increase the revenue they generate on many jobs, making them more profitable.  We can assure this investment will provide a high rate of return for their business.

EQUIPMENT INCLUDED

The equipment in this BEST PRESSURE WASHING TRAILER BUILD is the exact same equipment that we use and train our students on.  As newcomers enter this industry, this trailer build is a great goal to have for the future as your business grows.  First, there is the 9 gallon per minute mad max cold water pressure washer.  Then there is the whisper wash little big guy 24 inch surface cleaner.  The tank is a 225 gallon water tank plumbed to the pressure washer.  We use the banjo connector in the event you need water for any reason, which occurs often.  It also comes in very handy when the need arises to drain the tank.  The trailer itself is a 12 foot enclosed trailer.  The trailer has a ramp and we sealed the flooring for longevity.  Other equipment items included is the stack reel for three hoses, the KingSlinger Soft Wash System, and the Dougenator mixing station.  There is also a bypass downstream injector and of course, the pressure washing guns.

MONTLY TRAINING

We provide monthly training events and encourage you to click here for details for the next scheduled class.  If you have any questions, don’t hesitate to reach out!  Call 281-957-2851 or send us an email PressureCleaningSchool@gmail.com.