by Doug Rucker Doug Rucker

COBWEB REMOVAL TIPS

COBWEB REMOVAL TIPS

A repeat customer needs the front of her home cleaned before hanging Christmas decorations.  In this case, our COBWEB REMOVAL TIPS might come in handy for your pressure washing business.  The first tip is to clean any light fixtures.  This means removing the glass panels.  It’s important to clean these glass panels over the grass rather than over a concrete surface.  This reduces the chance of breaking the glass if one of them is accidently dropped.  This not a usual or normal part of the job, but our commitment and attention to detail sets us apart from the competition. We used a soft towel wiping down the inside of the fixture.  This type of superior customer service will help you retain customers and generate continuous repeat business.

COBWEB DUSTER

One of the main tools we use is a cobweb duster.  You can purchase these at home improvement stores or DIY pest control stores.  This approach means we reduce the amount of water needed for cleaning the surface after removing the cobwebs.  You always want to use the least amount of water possible when cleaning the entry way to avoid water intrusion into the home.  By using a towel and hand detailing certain areas and spaces, the visual result will be much better.  And you reduce the risk of causing damage because you can’t always little cracks and cervices where water can penetrate and create havoc.

SHOOTER TIP

We use the SLING SHOT SHOOTER TIP from the Doug Rucker Store.  At $22, this newly custom manufactured tip for us comes in three gallon per minute options.  This is for down streaming with your pressure washer.  In the picture below, you can see how this tip reaches higher then the third floor dormer window.  I spent several years testing this tip and finally got it perfected after several modifications.  It has a hex end which tightens easily into a quarter inch coupler plus.  Another one of our COBWEB REMOVAL TIPS is using RAP, which is an all purpose cleaner and surfactant at a 24-1 mix ratio.  So no bleach was needed for this project.  Consider coming to Houston for one of my two day training events this year.  It’s a great opportunity for continuing education and meeting new friends in the business.

 

Cobeweb Removal Tips

by Doug Rucker Doug Rucker

XJET MODIFIED FOR DOWNSTREAM

XJET MODIFIED FOR DOWNSTREAM

Have you ever wanted to use an XJET but without all the mist and pressure that the XJET puts out?  The good news is that you can do exactly that!  I’m going to walk you through an XJET modified for downstream.  Remember that as you are evaluating a job, you are evaluating three things.  You are looking at the surface type and stain presence, which then helps you determine which application method to use.  Application options include downstream injector, dedicated pump, XJET, or even a pump up sprayer.  The XJET is just one application for applying your bleach mix.

XJET SET UP

Here are a few preliminaries before the XJET MODIFIED FOR DOWNSTREAM is executed.  The XJET comes with hose, nozzle and proportion attachments that help meter the mix coming out of the XJET bucket.  Its very important when using the XJET bucket, which comes separately, to ensure the back valve is open.  This allows for ample ventilation.  Otherwise, the bucket will collapse as a result of vacuum suction upon draw.  One end of the hose will attach directly to top of the XJET bucket.

XJET MODIFICATION

The main step for an XJET MODIFIED FOR DOWNSTREAM is to install the main part of the XJET in between the gun and the lance of the pressure washing gun.  For more information concerning the BEST SOFT WASH GUN, click here.  Remove the quarter inch plug fitting from the XJET nozzle and the spring and orifice from inside.  Install a quarter inch threaded fitting directly into the gun.  We always recommend using teflon tape with lock seal to secure the fittings.  Next, screw the XJET fitting directly into the threaded fitting now attached to the gun.  Then there is another quarter inch  fitting with threading INSIDE which screws on to the XJET nozzle.  After you reinstall the wand, place the quarter inch coupler on the end of the wand.  Now, using the JROD for downstreaming along with the XJET modification, you have much lower pressure.  The same down streaming distance of 40 feet can be acheived with this XJET MODIFIED FOR DOWNSTREAM process.

X-Jet modified for downstreaming

EXTRA HOSE

The XJET arrives with an approximately 15 foot hose.  This will require needing to move the XJET bucket every 15 feet.  This will add needless time to every project that the XJET bucket is used.  We always recommend purchasing a 50 foot hose to use in place of the 15 foot hose it comes with.

XJET XTRAS

One of the great advantages of this XJET MODIFIED FOR DOWNSTREAM process is that your bleach mix is not running through more equipment, which means this equipment will last much longer.  In addition, this method means you will use more bleach.  This modification allows you to use your XJET as a downstream injector, which is great for post treating concrete surfaces with heavy landscape.  Mist and overspray is greatly reduced and much more controlled with an XJET MODIFIED FOR DOWNSTREAM.  I have provided a detailed video on my YOUTUBE channel link here which provides further insight and details for this.

LINKS TO NEEDED SUPPLIES

X Jet Long range Nozzle

X Jet Bucket Pail System

50 Foot Flexzilla 3/8 Air Hose

The quarter inch threaded couplings you can get at any building supply or plumbing supply store.