by Doug Rucker Doug Rucker

KINGSLINGER UPDATES

At Doug Rucker Store, we have made several quality improvements on the Kingslinger Soft Wash System.  In this video, we cover these upgrades extensively.  In fact, some of the concepts could help with any soft wash system you might be using presently.  These KINGSLINGER UPDATES are changes and modifications we have made over the Fall months of 2020.

MOUNTING PLATE UPDATES

We transitioned the pump from a 5 GPM to a dual 10 GPM pump, which in reality is two 5 GPM pumps working together.  The original plate was not sufficient to secure the pump rightly, so we have upgraded to a stronger plate.  This new plate is all set up for both the 5 GPM or 10 GPM pump, and will improve performance either way.  It is a wider plate and much more stable, which enhances the entire mixing system.  These Kingslinger Updates are covered in detail in the video below.

HOSE UPDATES

Another one of the KINGSLINGER UPDATES is the hose we now use for it.  We switched to a new poly braid hose, which is transparent.  This is very nice to able to see the amount of water present in the lines.  Previously, the yellow curly hose was a harder and more brittle hose.  In addition, the look was less than appealing, and hooking and unhooking was more challenging.  On the back, you find all stainless steel hardware attached for securing the Kingslinger to the compressor.  Another great update option is the GF valves.  You will have the option to choose between pentair or GF valves.

 

PLUMBING KITS

Plumbing kits are now available as an option.  It’s always a great idea to have extra hose because you never know when it might come in handy.  You can choose between 1/2 inch or 3/4 for the inlet fittings.  If you plan to use a soap tank, you can choose between 1/4 inch or 3/8 inch.  They will come with a bulkhead fitting which goes to the tank.  Also, here is a link to the soft wash gun I always recommend along with these Kingslinger Updates.

Kingslinger Upgrades