by Doug Rucker Doug Rucker

DROP TUBE FITTINGS

This DROP TUBE FITTINGS post and video comes as a result of a YouTube channel viewer request.  There are a couple different ways you can install them.  You can get all the parts at your local stores such as Home Depot or Lowe’s, but you can also get them from the Doug Rucker Store website.  In this video, I use the lid of a 5 Gallon Bucket for demonstration purpose to more easily show how to install drop tube fittings.

NO FILTER NEEDED

Some people like to use sand filters when installing drop tube fittings.  I choose not to use filtration because it restricts the flow.  The way we plumb our tanks with ventilation means we never open the lid.  Thus, there is seldom any trash or debris found in the tanks.  Be sure and view the entire video because there are a lot of variables that I discuss.  There are many different parts and many different strategies to make drop tube fittings.

BLUE COLLAR ENTREPRENEUR

Check out the YouTube channel called “Blue Collar Entrepreneur.”  I actually got the idea for using uniseals from this channel.  It’s a pretty good channel!  Cutting holes for the uniseal is a little bit different than for the bulkhead fittings so pay close attention to the cutting process.  In this case, the seal is “built in” so to speak.  It’s important to prepare the drop tube fittings so that air does not penetrate the system.

If you have any questions at all, please use the comments section in the YouTube video.  Also, don’t forget that if you need a website for your new pressure washing business, we can help! Or if you are unhappy with the way your website looks and feels presently, we can also help with that as well!  Just click that same link!